I. Lithium Carbonate Disc Continuous Dryer--Overview of Equipment

Lithium carbonate disc continuous dryer is a highly efficient continuous drying equipment. Its unique structure and working principle determine its high thermal efficiency, low energy consumption, small footprint, simple configuration, convenient operation and control, and operating environment. Good characteristics, no need to equip the cyclone dust collector that must be configured for spray drying, do not use hot air as the heating medium, therefore, there will be no product loss caused by the entrainment of the exhaust gas due to the separation of hot air and dust, and the disc type continuous dryer is widely used. It is suitable for the drying operation of chemical, pharmaceutical, pesticide, food, feed, agricultural and sideline products processing industries, and provides an important role for the development of modern society.
 
The disc dryer is a multi-layer fixed hollow heating circular loading tray, rotary mixing, vertical continuous heat conduction-based drying equipment developed on the basis of intermittently stirring the conduction dryer. The heat carrier is introduced into the hollow disks of each layer, and the wet material placed on the disk surface is indirectly heated by heat conduction, and the moisture in the continuously rolling material is operated under the action of the scraping of the rotating blade Evaporation at temperature, the vapor is withdrawn from the equipment exhaust, thereby continuously obtaining a qualified dry product at the bottom of the equipment.

The overall structure design of Jiangsu Bohong disc dryer is simple and reasonable, and the parallel structure drying disc is adopted, which increases the effective contact area between material and heat, realizes the comprehensive and efficient drying effect on the material, and can also minimize the heat loss. Loss rate, reduce the loss of heat, has a strong practicability, and secondly, through the provision of the inclined structure of the baffle, it can guide the water stain generated by the liquefaction of the top wall of the casing, making the water stain It can be uniformly discharged into the drain pipe along the deflector to reduce the humidity inside the casing and avoid secondary pollution of the material. On the other hand, the side plates on both sides of the blanking plate can be used for the blanking plate. The material on the top plays the role of preventing the falling off protection, avoiding the phenomenon that the material splashes during the discharging process, ensuring that the material can be discharged uniformly and stably, thereby improving the running stability of the dryer.