I. Titanium Vacuum Disc Dryer--Overview of Equipment

Titanium vacuum tray dryer is one of the important equipments for drying operations in chemical, pharmaceutical, pesticide, food, feed and agricultural and sideline products processing industries. Its unique structure and working principle determine its high thermal efficiency, low energy consumption, small footprint, simple configuration, convenient operation and control, and good operating environment. The disc dryer is a multi-layer disc, rotary mixing, vertical continuous drying device. The drying process is to pass the heat carrier into the fixed multi-layer hollow disc, and indirectly heat the wet material contacted on the metal disk surface by conduction, and under the mechanical stirring similar to the plough-shaped rakes, will continue to The moisture in the material that is tumbling forward moves vaporizes to obtain a qualified dry product at the bottom.

The titanium vacuum tray dryer comprises a cylinder, a spindle mounted in the center of the cylinder, a drying disc assembly, a collecting tray and a mechanical seal, a feeding device and a recovery bin at the top of the cylinder, and a discharging device at the bottom, two of the spindle The ends are respectively supported on the bearing seats at the outer ends of the cylinder, and the drying disc assembly comprises a mast, a boring tool, a small disc and a large disc. The mast is respectively located above the disc surface of the small disc and the large disc, and one end is connected to the main shaft through the coupling. The file is connected to the mast, and the bottom end of the file is in contact with the disk surface of the small plate and the large plate respectively. The small plate and the large plate are alternately stacked from top to bottom, and the small plate and the large plate are provided with an entrance on one side, and the other The side opening is provided with an outlet, and the inlet and the outlet are respectively connected to the heating pipe, the collecting tray is located at the bottom of the drying tray assembly, and the mechanical seal is connected at the center of the bottom of the collecting tray.

The vacuum tray dryer of titanium has a vacuum cover and a static elimination cloth bag inside, and the vacuum cover and the static elimination cloth bag work together to absorb the dust while collecting the steam, so as to prevent the dust from entering the condenser through the recovery bin. Affect normal work;


Titanium vacuum disc dryer has compact structure, reasonable design, safe and reliable work, high production efficiency, high vacuum of dryer, good drying effect, convenient disassembly, installation and debugging, and strong practicability.